How to clean iron at home from the burn-scale and - instructions for housewives

By Admin | Domestic Affairs
25 March 2016

How to clean the iron in the home of a deposit raid on the bottom and the scum - the most frequent problems with iron occurring as the intensity of use of the device, and from the illiterate-treatment.For example, by incorrect application of temperature regimes.With self-cleaning main rule - do not overdo it so as not to spoil the technique completely.

See also: How to choose an iron for the home - housewives advice.

How to do it right, and what are known methods of cleaning the iron?

content of the article:

  • How to clean iron from scale?
  • Clear the iron from scale
  • Reviews housewives

How to clean iron from scale - cleaning iron from scale at home

main reasons for the scale in the holes of the soleplate - it is hard water, which we pour into the device.

See also: How to clean the Burnt pan - the best home methods.

How to get rid of the scum?

  • Citric acid .Dissolve in hot water (1/2 cup) 2 h / L acid in the solution to moisten gauze and lay it in the hole.After 5-10 minutes, remove the cheesecloth and turn the iron - the m
    ost efficient scale is removed under the influence of heat.The rest of the scum can be removed with a cotton swab.
  • similar to the previous recipe - using vinegar and lemon juice .True, it has to suffer not the most pleasant smell of burning organic matter.
    How to clean iron at home against scale
  • great help and can provide a means of scaling , which are intended for tableware.
  • With regard store funds on the scale - their choice today is quite wide.The most effective German cleaners with additives, which perfectly remove the scum and protect metal.Should act according to instructions.
  • Use only purified (or distilled) water for iron - so you will extend its life.But first read this manual carefully to the iron - some models can not be used distilled water.
  • If there is a system of self-purification , should be filled with water container unit, set the maximum temperature, turn himself iron and wait for the automatic shutdown.Then repeat the procedure.
    How to clean iron at home against scale
  • People's method using cleaner Cillit .The one that removes rust and patina.Preheat the iron, unplug, put up the base and gently drip in his opening Silit.Speaking collect dirt with a sponge in 10-15 minutes, then rinse the inside and outside.Do not forget about safety precautions.

How to Clean iron from scale - eliminates carbon deposits on the iron folk remedies

If your favorite iron begins to spoil things, leaving dark marks on them, and complicates the process of ironing, it's time to clean the sole instrument of a deposit.

See also: How to choose an ironing board for the house - types of home ironing boards.

How can I clear?

  • Special pen to remove soot (find it in the shops is easy) - one of the most effective means.Heat the appliance off and rub the soles with a pencil.The softened varnish, you can quickly remove dry cloth.The smell is not the most pleasant, no harm to health.After cooling the iron base, wipe with a damp cloth.
    How to clean iron at home from the burn-
  • gidroperit. principle similar to the previous purification.Suffice it to two tablets.As for the smell, and the evolution of gas during the procedure - for this option is good ventilation is required.After peeling, remove the remaining dirt deposits with a wet cloth and wipe dry.
  • vinegar. Saturate this means rough cloth (such as a waffle towels), quickly remove the dirt on the unit is switched off.For efficiency, you can add vinegar ammonia.The attempt failed?Heat the iron and iron cloth that has been soaked in this solution.Do not forget about ventilation.If vinegar is not available, sufficient ammonia.
    How to clean iron at home from the burn-
  • Salt finely ground. This option is not suitable for devices with Teflon coating.To cleanse you need to pour a thick layer of salt on the net c / b cloth and hot iron on the layer several times.You can mix the salt with candle wax (pre-shredded).Just remember that when using paraffin tilting the device, so that the wax does not hit the steam holes.
  • If Nagar appeared from synthetic fabrics, iron and should be warm after turning it off to remove traces of data from the melt synthetic wooden object .
  • Searching for the least dangerous method of cleaning?Then you can mix baking soda with up liquid , spread the mixture on the bottom and a few minutes of intense wipe the base to complete its purification.After - wash and wipe with a dry cloth.
  • hydrogen peroxide. Wet wool peroxide, wipe the soleplate.
    How to clean iron at home from the burn-
  • You can also use toothpaste or powder dishwashing .Only after cleaning should be flushed with water and dry with a base.
  • and can apply nail polish remover .But just in case your device is not Teflon, enamelled or coated sapphire.

And, of course, aware of the preventive measures.That is, follow the manufacturer's recommendations , use the correct temperature conditions, do not clean the unit with abrasives and metal sponges, and promptly clean it sole soft wet cloth.

How do you clean your iron from metal penetration and scale?Reviews housewives